Liqui Moly Motorbike Tire Inflator and Sealer 300ml

Description

Seals flat tires and pumps them back up. After a repair, drive only at moderate speed. The tire must be reconditioned or replaced at the next opportunity. For all tire types with and without tubes. Do not use if the

tube is torn or if the tire has slipped off the rim or if the outer cover has a lateral tear!

Properties

permanently and reliably seals hairline cracks and small leaks

Areas of application

For all tire sizes with and without tubes for initial aid

and roadside assistance.

Application

Move the tyre valve to half the height of the rim and release the rest of the air. Remove the cause of the puncture (e.g. nail etc.). Shake bottle well. If cold, warm it up. Screw the connector onto the tyre valve.

Hold bottle vertically and spray. Note: Immediately ride at a speed between 10 and 15 k.p.h. so that the product can be optimally distributed around the tyre. Check the tyre pressure as soon as possible and find

a repair shop.

Comment

IMPORTANT: Tire pressure monitoring systems in tires can be destroyed by the solvents contained in the product.